Elmomc AC Input Digital Servo Drives-Tuba Instrukcja Użytkownika Pobierz pdf (Strona 15)

Tuba Installation Guide Introduction

MAN-TUBIG (Ver. 1.502)

www.elmomc.com

2.4. How to Use this Guide

In order to install and operate your Elmo Tuba servo drive, you will use this manual in

conjunction with a set of Elmo documentation. Installation is your first step; after carefully

reading the safety instructions in the first chapter, the following chapters provide you with

installation instructions as follows:

• Chapter 3, Installation, provides step-by-step instructions for unpacking, mounting,

connecting and powering up the Tuba.

• Chapter, Technical Specifications, lists all the drive ratings and specifications.

Upon completing the instructions in this guide, your Tuba servo drive should be successfully

mounted and installed. From this stage, you need to consult higher-level Elmo documentation

in order to set up and fine-tune the system for optimal operation. The following figure

describes the accompanying documentation that you will require.

Figure 2: Elmo Documentation Hierarchy

As depicted in the previous figure, this installation guide is an integral part of the Tuba

documentation set, comprising:

• The Composer Software Manual, which includes explanations of all the software tools that

are part of Elmo’s Composer software environment.

• The SimplIQ Command Reference Manual, which describes, in detail, each software

command used to manipulate the Tuba motion controller.

• The SimplIQ Software Manual, which describes the comprehensive software used with the

Tuba.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 78 79

Brak uwag

Elmomc AC Input Digital Servo Drives-Tuba Instrukcja Użytkownika Strona 15